Nevada Administrative Code (Last Updated: January 6, 2015) |
Chapter484D Equipment and Size, Weight and Load of Vehicles |
EQUIPMENT OF VEHICLES |
Standards for Pneumatic Tires |
NAC484D.210. Faults requiring removal of tire; tread-depth measurements.
-
1. The outside diameters of tires used on dual wheels must be such that each tire will contact the level roadway at all times. A tire must be removed from service if it has:
(a) Any portion of the ply or cord structure exposed;
(b) Any bump, bulge or knot related to ply or tread separation or partial failure of the tire structure;
(c) A ply or cord break; or
(d) A cut which extends more than 1 inch in any direction on the outside of the tire and is deep enough to reach the body cords.
2. For the purposes of NAC 484D.190 to 484D.215, inclusive, tread-depth measurements must not be made where tiebars, wearbars, humps or fillets are located.
[Dep’t of Motor Veh., Pneumatic Tires Reg. §§ V & VI, eff. 10-4-73]—(Substituted in revision for NAC 484.220)