NAC534.4351. Monitoring wells: Restrictions on construction; submission of plat map, map of vicinity, and log and record of work.

     1. A monitoring well must be:

     (a) Drilled only by a well driller who is licensed by the State Engineer;

     (b) Constructed in accordance with the provisions of this chapter, except for any provision that is waived by the State Engineer; and

     (c) Drilled only for the purpose of complying with federal, state or local environmental requirements or any other federal, state or local requirements.

     2. A plat map showing the actual location of the monitoring well, a map of the vicinity and a log and record of work which contains the information described in NRS 534.170 and NAC 534.340 must be submitted within 30 days after completion of the well by the person who is responsible for the well. The plat map must indicate the distance of the well from permanent reference points, including streets, roads or section lines. The map must be drawn on paper measuring 8 1/2 inches by 11 inches or 11 inches by 17 inches.

     (Added to NAC by St. Engineer, eff. 12-30-97; A by R009-06, 6-1-2006)