Nevada Administrative Code (Last Updated: January 6, 2015) |
Chapter445A Water Controls |
UNDERGROUND INJECTION CONTROL |
Definitions |
NAC 445A.810. Definitions. |
NAC 445A.811. “Application” defined. |
NAC 445A.812. “Aquifer” defined. |
NAC 445A.813. “Area of review” defined. |
NAC 445A.814. “Casing” defined. |
NAC 445A.815. “Catastrophic collapse” defined. |
NAC 445A.816. “Cementing” defined. |
NAC 445A.8163. “Cesspool” defined. |
NAC 445A.8167. “Community water system” defined. |
NAC 445A.817. “Confining zone” defined. |
NAC 445A.818. “Contaminant” defined. |
NAC 445A.819. “Degrade” defined. |
NAC 445A.8195. “Delineate” defined. |
NAC 445A.820. “Department” defined. |
NAC 445A.821. “Director” defined. |
NAC 445A.8213. “Division” defined. |
NAC 445A.8217. “Drywell” defined. |
NAC 445A.822. “Fault” defined. |
NAC 445A.823. “Fluid” defined. |
NAC 445A.824. “Formation” defined. |
NAC 445A.825. “Groundwater” defined. |
NAC 445A.8255. “Groundwater protection area” defined. |
NAC 445A.826. “Hazardous waste” defined. |
NAC 445A.8263. “Improved sinkhole” defined. |
NAC 445A.8267. “Injection” defined. |
NAC 445A.827. “Injection well” defined. |
NAC 445A.828. “Mechanical integrity” defined. |
NAC 445A.8282. “Motor vehicle waste disposal well” defined. |
NAC 445A.8285. “Nontransient noncommunity water system” defined. |
NAC 445A.8287. “Other sensitive groundwater area” defined. |
NAC 445A.829. “Packer” defined. |
NAC 445A.830. “Permit” defined. |
NAC 445A.831. “Person” defined. |
NAC 445A.832. “Plugging” defined. |
NAC 445A.833. “Radioactive waste” defined. |
NAC 445A.8332. “Sanitary waste” defined. |
NAC 445A.8335. “Septic system” defined. |
NAC 445A.8337. “Source water assessment and protection program” defined. |
NAC 445A.834. “Stimulation of a well” defined. |
NAC 445A.835. “Subsidence” defined. |
NAC 445A.8355. “Subsurface fluid distribution system” defined. |
NAC 445A.836. “Total dissolved solids” defined. |
NAC 445A.837. “Underground source of drinking water” defined. |
NAC 445A.838. “Well” defined. |
NAC 445A.839. “Zone for injection” defined. |
NAC 445A.840. “Zone of endangering influence” defined. |
General Provisions |
NAC 445A.842. Applicability of regulations. |
NAC 445A.843. Applicable standards of other governmental agencies. |
NAC 445A.8435. Public access to information concerning locations of groundwater protection areas and other sensitive groundwater areas. |
NAC 445A.844. Classes of injection wells. |
NAC 445A.845. Class I wells. |
NAC 445A.846. Class II wells. |
NAC 445A.847. Class III wells. |
NAC 445A.848. Class IV wells. |
NAC 445A.849. Class V wells. |
NAC 445A.8491. Motor vehicle waste disposal wells: Requirements for well in operation or under construction on or before April 5, 2000. |
NAC 445A.8493. Motor vehicle waste disposal wells: Deadlines for owner of well to meet requirements; extension of deadlines; conversion of well. |
NAC 445A.8495. Motor vehicle waste disposal wells: Application for permit to continue operation of well. |
NAC 445A.8497. Motor vehicle waste disposal wells: Conditions for granting exemption to owner of well determined to be located in other sensitive groundwater area. |
NAC 445A.8499. Motor vehicle waste disposal wells: Requirements for owner of well when location is changed by updated local source water assessment. |
NAC 445A.850. Injection of fluid that degrades quality of aquifer prohibited; exemption of aquifer by Director. |
NAC 445A.851. Criteria for determining exemption of aquifer. |
NAC 445A.852. Identification of exempted aquifers. |
NAC 445A.853. Exemption terminated when well abandoned; exception. |
NAC 445A.854. List of exempted aquifers. |
NAC 445A.855. Specific aquifers exempted. |
NAC 445A.856. Prohibited wells and injections; exceptions. |
NAC 445A.857. Prohibited wells: Report by owner or operator. |
NAC 445A.858. Prohibited wells: Abandonment and plugging; monitoring. |
NAC 445A.8585. Establishment of concentration level for contaminant. |
NAC 445A.859. Certification of documents submitted to Director. |
NAC 445A.860. Confidentiality of information submitted to Director. |
NAC 445A.861. Complaint of violation; investigation. |
NAC 445A.862. Enforcement of regulations. |
Permits for Underground Injection |
NAC 445A.865. Purpose of issuing permits; no vested right acquired by holder. |
NAC 445A.866. Effect of permit issued by Environmental Protection Agency. |
NAC 445A.867. Application for permit. |
NAC 445A.868. Information required in application for Class II well. |
NAC 445A.869. Modification of information required in application for Class V well. |
NAC 445A.870. Information required in application for Class III well that necessitates exemption for aquifer. |
NAC 445A.871. Bond required. |
NAC 445A.872. Fees. |
NAC 445A.873. Notification whether application complete; submission of additional information. |
NAC 445A.874. Preparation of documents by Director when application is complete. |
NAC 445A.875. Public notice of tentative action on application for permit. |
NAC 445A.876. Contents of public notice. |
NAC 445A.877. Public hearing and comments concerning tentative action on application for permit; notice of hearing. |
NAC 445A.878. Statement by Director responding to comments concerning tentative action on application for permit. |
NAC 445A.879. Period for issuance or denial of permit. |
NAC 445A.880. Expiration of permit. |
NAC 445A.881. Transfer of permit. |
NAC 445A.882. Renewal of permit. |
NAC 445A.883. Permit for certain groups of wells. |
NAC 445A.884. Single permit for facilities otherwise required to obtain additional permits. |
NAC 445A.885. Modification, revocation, suspension, cancellation or denial of permit; cessation of activity requiring permit. |
NAC 445A.886. Submission of information requested by Director. |
NAC 445A.887. Permit for Class V well may contain less stringent requirements. |
NAC 445A.888. Inclusion in permit of schedule for compliance. |
NAC 445A.889. Notice to Director of failure to comply with terms of permit. |
NAC 445A.890. Issuance of temporary permit. |
NAC 445A.891. General permits: Eligible types of wells. |
NAC 445A.8915. General permits: Procedures to request coverage for Class V well. |
NAC 445A.892. General permits: Description of geographic area. |
NAC 445A.893. General permits: Regulation of category of wells. |
NAC 445A.894. General permits: Requiring holder to obtain individual permit; petition for exclusion. |
NAC 445A.895. General permits: Public notice and opportunity for hearing. |
NAC 445A.896. General permits: Modification, suspension or revocation. |
NAC 445A.897. Area of review: Definition. |
NAC 445A.898. Area of review: Increase or decrease by Director. |
NAC 445A.899. Identification of known wells and analysis of pressure; plan for corrective action. |
NAC 445A.900. Action by Director on plan for corrective action. |
NAC 445A.901. Applicant to report improperly completed, plugged or abandoned well; correction of condition. |
NAC 445A.902. Minor modifications to permit. |
Construction, Operation, Monitoring and Abandonment |
NAC 445A.905. Construction prohibited without permit. |
NAC 445A.906. Compliance with permit; minimization or correction of adverse impact on environment. |
NAC 445A.907. Power of Director to suspend or halt construction or operation. |
NAC 445A.908. Location and construction of well. |
NAC 445A.909. Submission and contents of notice of completion; approval or denial of permission to initiate injection. |
NAC 445A.910. Factors for determining logging and testing requirements for Class II wells. |
NAC 445A.911. Limitations on location and pressure of injection; authorizing fracturing in zone for injection. |
NAC 445A.912. Analysis of injected fluid. |
NAC 445A.913. Frequency of monitoring. |
NAC 445A.914. Placement of wells for monitoring Class III wells. |
NAC 445A.915. Analysis of wells for monitoring Class III wells. |
NAC 445A.916. Tests for mechanical integrity: Frequency. |
NAC 445A.917. Tests for mechanical integrity: Methods for evaluating absence of leaks. |
NAC 445A.918. Tests for mechanical integrity: Methods for determining absence of movement of fluid. |
NAC 445A.919. Tests for mechanical integrity: Alternative methods. |
NAC 445A.920. Loss of or failure to demonstrate mechanical integrity. |
NAC 445A.921. Filing reports from monitoring and results of periodic tests. |
NAC 445A.922. Retention of records from monitoring. |
NAC 445A.923. Plugging and abandonment: Plan; notice; procedure; certification. |
NAC 445A.924. When well is deemed abandoned. |
NAC 445A.925. Plugging of well determined to be abandoned. |